The VPOC™ (Virtual Power on Call) Module is a 10kW Swappable Power Module for use in the VPOC™ Shelf by Lite-On Power System Solutions. Combined with the 1U Li-ion battery or the 3U VRLA battery, this is the key component for businesses looking to improve the delivery of power and protect their critical infrastructure.
The highly-efficient VPOC™ Module easily slides into the 1U VPOC™ Shelf alongside two swappable lithium-Ion battery modules that offer 2.5 minutes of runtime at full load. A valve-regulated, lead acid battery pack option is also available. For power distribution, the VPOC™ PDU supplies AC and DC power to your servers.
“10kW AC and DC output power at 99% efficiency.”
| Features | VM-3103-111U |
|---|---|
| Input voltage, nominal | 208VAC / 220VAC / 230VAC / 240VAC |
| Output voltage, nominal | 208VAC / 220VAC / 230VAC / 240VAC or 240VDC |
| High Efficiency | 99% efficiency during AC or DC operation |
| Module Power | 10kW output power – AC and DC |
| Built-in Bypass | Internal automatic and integral maintenance bypass |
| Fast mode conversion | < 4ms @ AC mode transfer to DC backup mode |
| Protection | Internal AC bypass, Input over voltage, over temperature Overload, Powering surge limiter, Excessive battery charging / discharging REPO, AC Breaker, backfeed, fan lock, Fault-tolerant design |
| Multiple Communication Ports | USB, CAN, RS-232 – ModBus communication protocol |
| Small Form Factor | Designed for the 1U VPOC Shelf – Dimensions (H x W x D) 1.65” x 4.02” x 19.5” (40.5 mm x 102 mm x 480 mm) |
| In/Out Phase Configuration | Single-Phase AC input |
| Approvals | UL60950-1, IEC60950-1 International, GB4943, RoHS |
| Input (AC) | |
|---|---|
| Input voltage, nominal | 208V / 220V / 230V / 240V (L-N-G) |
| Input voltage range | 187~264V Full Load |
| Input frequency | 50/60 Hz, auto sensing |
| Power Factor @ Full computer or R Load | > 0.99 |
| Input current total harmonics distortion @ Full R Load | < 3% |
| Efficiency @ Full R Load, bypass and AC mode | > 99% |
| Efficiency @ Full R Load, DC mode | > 99% |
| Output | |
|---|---|
| Output Power | 10 kVA |
| Active Power | 10 kW |
| Output voltage, nominal (AC) | 208V/220V/230V/240V AC(L-N-G) |
| Output voltage, nominal (DC) | 240V DC |
| Output Voltage Range (DC) | 192V~300V DC, 200~300V @ full load |
| Transfer time AC to DC mode | < 4ms @ full load |
| Overload capability | Continuous at 105% |
Shown above is a VPOC™ Shelf with removed bezel, a VPOC™ Power Module slightly disengaged, and two Lithium-ion battery modules.
VPOC™ System Components
The VPOC™ system provides a comprehensive power management and battery backup capability based on multiple building blocks with configuration flexibility to suit specific power, size, and run-time requirements. The table below provides additional information on the different building blocks available to create a customized power solution. Please contact your Lite-On CIPS representative for support or more in-depth information.
| Component | Model Number | Description |
|---|---|---|
| VPOC™ Module | VM-3103-111U | 10kW Power Module |
| VPOC™ Shelf | VP-3103-111U | VPOC™ Power Shelf with 3 slots:
|
| VPOC™ PDU | RU-2020-082N RU-2020-081N RU-2030-141N | 1U or 0U Cabinet PDU with 20A fuse and IEC320-C13 receptacles (6) plus IEC320-C19 receptacles (2) Expansion PDU with 20A fuse and IEC320-C13 receptacles (6) plus IEC320-C19 receptacles (2) 0U Cabinet PDU with 20A/30A fuses and IEC320-C13 receptacles (12) plus IEC320-C19 receptacles (2) |
| VPOC™ Li-ion Battery Unit | BM-1502-010U BM-1402-010U | 2.5 minute runtime at 5kW (2 battery units provide 2.5 minutes at 10kW) 4kW VPOC™ Li-ion Battery Module |
| VPOC™ VRLA Extended Battery Module | BK-1151-010U | 3U EBM equipped with VRLA batteries for 3.5 minute runtime at 10kW |
| Site Management Controller | CP-13EC-010U | Rack management and control |
| 19″ Rack | KT-1942-101 | 19-inch EIA rack |